The Bosch CET4-20W Four-Gallon, Two-HP Wheeled Twin-Angled Tank Air Compressor is easy to transport and use, yet tough enough to withstand heavy-duty jobsite conditions. This CSA-certified compressor has a four-gallon tank and requires only 10 seconds of recovery time. It's specially designed to eliminate common air-compressor complaints and to provide a high level of user comfort.  | The CET4-20W Four-Gallon, Two-HP Wheeled Twin-Angled Tank Air Compressor offers:- 10-inch pneumatic tires for easy, balanced mobility.
- Angled "EZ Drain" system for effortless draining.
- 3,400 RPM induction motor for powerful performance.
|
|  |
|
An oil-lubed pump adds durability and a cold-start valve averts weather damage. View larger. |
 |
Vertically angled tanks allow for easy draining and balance the compressor for portability. View larger. |
Vertically Angled Tanks for Your Comfort
Other air compressors can cause discomfort because they lack balance, and their exposed motor and components make them difficult to carry. But the CET4-20W is comfortable to use, because it features vertically angled tanks that are ergonomically balanced. And because this compressor stays close to your body, it provides a natural center of gravity. Additionally, the roll cage and recessed, easy-access control panel protect you from exposure to the regulator, gauges, coupler, and drain valve. Compact Size and 10-Inch Pneumatic Tires for Portability
Unlike large wheeled compressors that hold the majority of their weight in front, the CET4-20W is balanced, measuring 7.75 x 19.75 x 16.25 inches (WxHxL) and weighing 84.9 pounds. It's compact, lightweight, and even enough for effortless movement around the jobsite. It also boasts 10-inch pneumatic tires and an easy-folding handle to further enhance portability.
EZ Drain System for Fast, Efficient Draining
To ensure that the tanks drain properly, and to prevent a decrease in compression that can cause a decrease in productivity and performance, the CET4-20W boasts Bosch's "EZ Drain" system. First, the tanks are slightly angled to allow water to collect at their bottoms. Second, the drain system is connected to both tanks to allow for easier draining. Finally, with pressure in the tanks, you can simultaneously drain them both by turning the ball valve located in the control panel.
Powerful Induction Motor and Cold-Start Valve for Professional Performance
The CET4-20W owes its robust performance to a powerful two-pole induction motor that spins at a speed of 3,400 RPM. This motor provides a dBA of 80 to cut down on distracting noise when you're working close to the compressor. There's also a cold-start valve that prevents the compressor from blowing a fuse in cold weather.
Additionally, a contractor-grade, oil-lubed pump ensures durability and extends tool life. The CET4-20W comes with an industry-leading, two-year pump warranty.
Safety-Relief Valve, Air Filter, and Dipstick for Additional Protection
In addition to its protective design, the CET4-20W features a safety-relief valve to prevent failures by relieving pressure from the system when compressed air reaches a predetermined level. And to prevent dirt and debris from compromising performance or durability, an air filter cleans the air coming into the pump. Finally, an oil dipstick lets you know exactly how much oil is left in the tank, so it's always clear when it's time to refuel.
Straightforward, User-Friendly Operation
The CET4-20W has an easy-to-read tank pressure gauge that lets you know the amount of pressure available, as well as a regulator that allows you to easily set the right level for driving nails. Additionally, two couplers are located on the tool's front for fast, uncomplicated hose attachment. For added convenience, the CET4-20W requires just 10 seconds of recovery time.
What's in the Box
Compressor with oil in the pump.
 |
| For more information, click on the images below |
| Bosch Nail Guns and Compressors |
 |  |  |  |  |  |
SN350-20F
Full Head Framing Nailer
| SN350-34C
Clipped Head Framing Nailer | FNA250-15
15 Gauge Angled Finish Nailer | FNS250-16
16 Gauge Angled Finish Nailer | BNS200-18
18 Gauge Brad Nailer | STN150-18
18 Gauge Narrow Crown Stapler |
 |  |  |  |  |  |
RN175
Coil Roofing Nailer
| CGT8-65W
8 Gallon 6.5 HP Gas Wheelbarrow Air Compressor | CET8-15W
8 Gallon 1.5 HP Electric Wheelbarrow Air Compressor | CET3-10
3 Gallon Electric Hand Carry Compressor | CET4-20
4 Gallon Electric Hand Carry Compressor | CET4-20W
4 Gallon Electric Compressor w/ Wheels |
